MIG welder repairs
3-phase MIG welders are the workhorses of New Zealand workshops, and they're the most common machine through our repair bench. Single phase or 3-phase, inverter or transformer, we'll have it back on the tools fast.
From wire feed to power boards
Wire not feeding
Slipping, stopping or bird-nesting wire: drive rolls, liners, tension and feed motors.
Gas & porosity
Gas solenoids, regulators and leaks that leave porous, dirty welds.
Erratic arc
Spatter and an unstable arc from voltage control, earth or contact faults.
Torch faults
Trigger switches, liners, cables and euro connectors.
3-phase machines
Contactors, rectifiers and switches on heavy workshop transformer sets.
Aluminium upgrades
Spool guns and push-pull guns retrofitted for welding aluminium.
MIG welder not feeding wire? Check these first

Wire feed trouble is the most common MIG complaint, and some causes are quick to check before you book a repair:
- Drive rolls. Is the groove the right size and type for your wire (V-groove for solid steel, U-groove for aluminium, knurled for flux-cored)?
- Drive roll tension. Too loose and the wire slips; too tight and it deforms and jams.
- Spool brake. If the spool hub is too tight the motor struggles to pull the wire.
- Liner. A worn, dirty, kinked or wrong-size liner is the most common cause of erratic feed.
- Contact tip. Check the tip matches the wire size and isn't worn or burnt back.
- Torch lead. Keep the cable as straight as possible while welding; tight loops add drag.
If you've checked all of these and the wire still won't feed, the problem is usually the feed motor or its control board. That's a workshop job, and it's exactly what we fix. Need parts instead? We stock MIG torch parts, liners and MIG wire.
Back to work in four steps
Book
Call, email or book online in under a minute. We'll call you back within 2 hours.
Pickup
Free pickup across Christchurch metro, or drop off at 243 Annex Road. Freight arranged from anywhere.
Diagnose & repair
Diagnosed and fixed by our technicians, with common parts in stock. All major brands.
Back to work
Load tested to factory spec and returned. Over 90% within 4 working days.
MIG welder repair questions
Straight answers from our workshop team.
Talk to a technician, Mon–Fri 8am–5pm.
Why is my MIG welder not feeding wire?
The usual causes are the wrong drive rolls, incorrect drive roll or spool brake tension, a worn or kinked liner, or the wrong contact tip size. If those check out, the feed motor or control board may have failed. Call us and we'll help you work out which.
Do you repair 3-phase MIG welders?
Yes. 3-phase MIG welders are the most common machine through our workshop, and every one is load tested to factory specification before it goes back.
Can you fit a spool gun to my MIG welder?
In many cases, yes. We retrofit spool guns and push-pull guns to existing welders so they can weld aluminium. Call us with your machine details.
How long do welder repairs take?
Over 90% of our repairs are back with their owners within 4 working days, as long as the parts are readily available. We stock a wide range of common parts to keep turnaround fast.
Do I get a loan machine while mine is repaired?
Yes, we provide a free loan machine for most standard repairs on commercial machines, so your production doesn't stall. Loan machines aren't available for hobby machines. Please mention it when you book.
MIG torch parts & consumables
Book your MIG welder repair
Repair requests go straight to our repairs team. We'll call you back within 2 hours.
Welder down? Call now.
Talk to the workshop, book a pickup or arrange a loan machine.
