Trade pricing? Call us. Real welders answer the phone.
FAQs

Straight answers

The questions our counter and workshop team hear most. Can't see yours? Call (03) 348 5200.

FAQs

Welder repairs

Straight answers from our workshop team.

Still not sure?

Talk to a technician, Mon–Fri 8am–5pm.

Call
How long do welder repairs take?

Over 90% of our repairs are back with their owners within 4 working days, as long as the parts are readily available. We stock a wide range of common parts to keep turnaround fast.

Do I get a loan machine while mine is repaired?

Yes, we provide a free loan machine for most standard repairs on commercial machines, so your production doesn't stall. Loan machines aren't available for hobby machines. Please mention it when you book.

Do you pick up machines for repair?

Yes. Pickup and return are free across the Christchurch metro area, from Hornby to Bromley. We can also collect from outside that area, such as Kaiapoi, Belfast and Rolleston, for a fee. From anywhere else we can organise a courier or freight company, at your cost.

Which welders and brands do you repair?

We repair and service all brands of welders: MIG, TIG and spot welders, plasma cutters, and MIG and TIG torches. Brands include Miller, Lincoln Electric, Kemppi, ESAB, Fronius, Weco, Unimig, Strata, Weldtech and Xcel-Arc, plus Hugong and GYS. Our technicians work on both digital inverters and traditional transformer machines. Brand repairs

Can I send my machine from outside Christchurch?

Yes. We can arrange a courier pickup from anywhere, at your cost: call 0800 935 375 or (03) 348 5200. Machines are sent to us from all over the South Island and the North Island; we've even repaired machines sent from Australia.

How quickly will you get back to me?

Book by phone, email or the repair form and we'll contact you within 2 hours (Monday to Friday, 8am to 5pm) to arrange pickup or drop-off.

Why is my MIG welder not feeding wire?

Check the drive rolls suit your wire, the drive roll and spool brake tension, the liner (worn, kinked or wrong size) and the contact tip size. If those are fine, the feed motor or control board may have failed. MIG welder repairs

Why won't my TIG welder strike an arc?

Common causes are a high-frequency start fault, a contaminated tungsten, gas flow problems or a poor earth. HF start faults are a regular repair for us. TIG welder repairs

FAQs

Choosing & using a welder

Straight answers from our workshop team.

Still not sure?

Talk to a technician, Mon–Fri 8am–5pm.

Call
Which welder should I buy as a beginner?

For most home users, a single phase inverter MIG of around 160 to 200 amps that runs both gas and gasless wire is the most versatile first machine. The MIGs we sell will do stick (arc or MMA) welding as well. Stick welding is cheaper, copes better with wind outdoors and suits thicker metal (3 to 12mm and up). TIG is harder to learn but gives the cleanest results on thin metal and on difficult metals like aluminium and stainless steel. Stick and TIG are both slower than MIG. Hiring a machine for a weekend is a cheap way to try before you buy. Machine hire

MIG, TIG or stick welding: which do I need?

MIG is fast, easy to learn and good for general fabrication. Gasless wire works well outside and on rusty or weathered metal. TIG is slower than MIG and harder to learn, but excellent for thin metal and difficult materials like stainless steel and aluminium, with precise, good-looking and very strong welds. Stick is slower than MIG but excellent for thicker steel, outdoor work and rusty or dirty metal. It's versatile, welding steel, stainless, cast iron and dissimilar metals, and it runs off less power.

Will a welder run off a household socket?

NZ household sockets are usually rated at 10 amps, and smaller welders, or welders with a low duty cycle, plug straight in. Single phase machines with a decent duty cycle need a 15A plug: they can produce more welding current for longer, so they draw more power when run hard. A 15A plug has a wider earth pin than a 10A plug, by design, so a high-draw appliance can't be plugged into a standard 10A circuit by accident. Some of our hire machines have a 15A plug. To use one on a 10A socket, use a purpose-built legal adaptor (we hire them out), or have a registered electrician fit a 15A outlet.

What thickness of metal can a welder weld?

It depends on the welding process and the amperage. Stick works best on 3 to 12mm and up, MIG is best on 1 to 6mm but can do up to 10mm on single phase, and TIG works best on 0.5 to 6mm. Thicker material can be welded in multiple passes with bevelled edges, and 3-phase machines can do more than these figures. Our 180A hire MIG welds steel up to 6mm and our 250A Proweld hire MIG up to 10mm.

Can I weld aluminium with my MIG?

Yes, with the right setup: pure argon, aluminium wire, and a different torch liner, drive rollers and contact tips. We have these on the shelf to suit most machines. Aluminium wire is soft and kinks in a standard torch liner, and the machine needs to be 200 amps minimum. We also retrofit spool guns and push-pull guns to existing welders for welding aluminium. For TIG welding aluminium, AC TIG works very well.

What tungsten should I use for TIG welding?

If you want one tungsten for both AC and DC, E3 (purple) is the best option. Zirconiated (white) is for AC only: aluminium and magnesium. Thoriated (red) works well on DC (steel and stainless steel) but is very slightly radioactive.

FAQs

Welding gas

Straight answers from our workshop team.

Still not sure?

Talk to a technician, Mon–Fri 8am–5pm.

Call
Do you refill or exchange gas cylinders?

Yes, both. On our swap scheme you pay a refundable cylinder deposit plus the gas, and take a full cylinder away with no rent, however long you keep it. When it's empty, swap it at our Middleton store for a full one and pay only for the gas. If you own your own cylinder, we can fill it with CO2, argon or MIG gas instead.

Do I have to pay rent on gas cylinders?

No. With the WeldPlus gas scheme there are no rental fees, no contracts, no low-user fees and no cylinder testing fees. You pay a refundable deposit and the gas, and that's it. How it works

Do I get my deposit back?

Yes. If you return the cylinder and don't need more gas, you get your deposit back. With some other swap schemes you have to sell your cylinder when you no longer need it; with ours, the deposit is simply refunded.

Can you fill a cylinder I already own?

Yes, if the cylinder is yours. We fill customer-owned cylinders with CO2, argon or MIG gas: argon and MIG gas in A, D and F sizes, and CO2 cylinders up to 5kg, and you get your own cylinder back. We don't fill other companies' rental cylinders. We can test cylinders too.

Which gases do you supply?

On the swap scheme: argon, MIG gas (an argon and CO2 mix for welding steel), oxygen, acetylene and industrial grade nitrogen, in D and E size cylinders (acetylene and nitrogen in D size only). We also sell a 5kg CO2 ownership cylinder for MIG welding, and food grade CO2 for home brewing and soda maker refills.

What gas do I need for MIG and TIG welding?

For MIG welding steel, use CO2 or MIG gas (an argon and CO2 mix). Pure argon is unsuitable for MIG welding steel: it gives poor penetration and the weld just sits on top of the metal. Pure argon is for MIG welding aluminium and for all TIG welding.

What cylinder size should I get?

We have D and E sizes (acetylene and nitrogen in D size only). At 10 litres a minute, a D size cylinder (2.1 m³) gives about 3.5 hours of welding and an E size (4.9 m³) about 8 hours. The 5kg CO2 ownership cylinder gives about 5.5 hours, and needs a test every 5 years.

Can I collect gas or have it delivered?

Both. Collect from our Middleton store, or we can deliver for a delivery fee. Call (03) 348 5200 to arrange it.

FAQs

Ordering & delivery

Straight answers from our workshop team.

Still not sure?

Talk to a technician, Mon–Fri 8am–5pm.

Call
Why can't I see prices online?

Most of our customers are trade, and pricing depends on volume and account. Call (03) 348 5200 or add items to a quote and we'll come back with your best price, usually the same day.

Do you deliver outside Christchurch?

Yes. We deliver NZ-wide, within 48 business hours or we pay the freight.

Can I order online?

Browse the full range online, then call, email or send us a quote list. We'll confirm stock and pricing and get it on its way.

Can you get a part you don't list?

We stock everything to do with welding, and if you need an obscure part we'll do our best to get it. Call with the part number or a description.

How does the quote list work?

Tap + Quote on any product to add it to your list, then send the list from the quote drawer or the contact page. We'll reply with trade pricing, usually the same day.

FAQs

Machine hire

Straight answers from our workshop team.

Still not sure?

Talk to a technician, Mon–Fri 8am–5pm.

Call
How long can I hire a welding machine for?

By the day, week or month, with discounts for longer hire. See the hire fleet

Is there a bond on hire machines?

A bond is required for non-account holders.

What comes with a hire machine?

Each machine comes ready to weld with its torch, earth lead and regulator where needed. Consumables such as gas, wire, tips and electrodes are extra.

Need it sorted today?

Call for trade pricing, stock checks or to book a repair.