Fluxcoated easyflow 45% silver Brazing alloy, 1.6mm, per stick.

Fluxcoated easyflow 45% silver Brazing alloy, 1.6mm, per stick.

Easy flow 45% Silver is a universal general purpose brazing alloy, cadmium free, 1.6mm x 450mm. MINIMUM ORDER ONLY 1 STICK.

For joining copper to brass to steel to stainless steel or any combination. The higher proportion of silver means it has GOOD CAPILLARY ACTION to fill narrow gaps, can be drawn over 50mm. Great for hydraulic fittings.

Melting range 640 - 680 C, the lowest of any Silver bearing Alloy - HEAT INPUT INTO THE WORK IS KEPT TO A MINIMUM. No additional Flux needed as the rod has a pre measured Flux coating on it. Handy for SITE WORK.

STRONG - tensile strength is 442 MPa. Also available in a Bare (not flux coated) version. Braze with MAPP gas, Oxy-Acetylene or Oxy-LPG (propane).